T&G Bluetooth Speaker User Manual - Instructions & Guide | bol.com (2024)

Product Information:

The Bluetooth Speaker is a portable wireless speaker that allowsyou to listen to music from your mobile phone, music player, orPC/laptop. It comes with various features and specifications:

• Bluetooth Specification: Bluetooth V3
• Operating Distance: Up to 10 meters
• Battery: Rechargeable 450mAh Lithiumbattery
• Working Times: Music playback for up to 4hours (at 50-70% volume)
• Charging Time: 3-4 hours
• Dimension: DIA 60mm x H 57mm
• Weight: 228g
• Speaker Specifications:
• - Diameter: 2 inch
• - Impedance: 4
• - Power Output: 3W
• - dBSPL: 80+/-3 dB

Product Usage Instructions:

Charging Your Speaker:

To charge your speaker, follow these steps:

1. Connect the provided Micro USB cable to the Micro USB chargingport (C) on the speaker.
2. Connect the other end of the USB cable to a power source with aDC 5V output.
3. The Power/Charging/Pairing indicator light (D) will turn on,indicating that the speaker is charging.
4. Once fully charged, the indicator light will turn off.

AUX Line In Mode:

To use the speaker in AUX line in mode, follow these steps:

1. Switch on the speaker using the Power On/Off button (A).
2. Connect one end of the provided 3.5mm audio cable to your musicdevice.
3. Connect the other end of the audio cable to the speaker's AUXline in port (B).
4. The Power/Charging/Pairing indicator light (D) will turn on,indicating that the speaker is connected.
5. Control the music playback and adjust the volume using yourmusic player and the volume buttons on the speaker (E, F, G).

Note: The handsfree function is not available in AUX line inmode.

Bluetooth Mode for Music Streaming:

To use the speaker in Bluetooth mode, follow these steps:

1. Switch on the speaker using the Power On/Off button (A).
2. The speaker will emit a tone and the Bluetooth indicator light(D) will flash consecutively, indicating that the Bluetoothfunction is available.
3. Refer to your mobile phone's user manual for specific pairingprocedures.
4. Make sure your mobile phone and the speaker are withinBluetooth range (up to 10 meters).
5. Activate your mobile phone's Bluetooth function and search forBluetooth devices.
6. Select "SCABT" from the Bluetooth device list.
7. The Bluetooth indicator light (D) will remain solid, indicatingthat the pairing is successful.
8. Control the music playback and adjust the volume using yourmusic player and the volume buttons on the speaker (E, F, G).

Note:

• - The speaker can only sync with one device at a time, and theconnection cannot be deleted while matching. It can only be deletedin disconnection mode.
• - Make sure your mobile phone does not have two devices withthe same name in its Bluetooth connection list, as this may causeconnection issues.
• - Some mobile phones may require you to select the speaker asthe audio output device in the settings menu to ensure the music istransmitted to the speaker.
• - If Bluetooth pairing fails, delete other Bluetooth devices inthe connection list, restart the speaker, and try again.
• - The disconnection of Bluetooth may take a few seconds tofully disconnect from the smart phone.

File Info : application/pdf, 5 Pages, 63.64KB

PDF [download]

original

Bluetooth Speaker Instruction ManualKnow your speakerBottom View Side ViewA: Power On/Off B: 3.5mm AUX line in C: Micro USB charging port (DC 5V) D: Power/ Charging/ Pairing indictor light E: Volume down F: Handsfree answer/ hang up G: Volume up H: MicrophoneProduct specificationBluetooth specification Operating distance Battery Working times Charging timeBluetooth V3 Up to 10 meters Rechargeable 450mAh Lithium battery Music: up to 4 hours (50-70% volume) 3-4 hoursDimension Weight Speaker specifications Diameter Impendence Power output dBSPLDIA 60mm x H 57mm 228g2 inch 4 3W 80+/-3 dBPackage & Accessories-Bluetooth Speaker-Micro USB cable-3.5mm audio cable-Instruction manualOperation Instructions-Charging your speakerYour speaker comes with a built-in rechargeable battery. Prior to using it for the first time, it is recommended to completely charge the battery. When the speaker is in low power status, the speaker will emit a tone. Please recharge the battery of the speaker. Connect the provided USB cable to a compatible AC-charger, computer or laptop USB port. The red LED will be illuminated while charging. It takes approximately 3-4 hours to completely charge the battery. When charging is completed, the red LED will switch off. When the battery is fully discharged, the unit will require a minimum of 30 minutes of charging before speaker function or Bluetooth music streaming can resume.-AUX line in ModeWith the speaker switched on, connect 3.5mm audio cable to your music device and to the speakers Aux input. The red indicator light will switch on once it is connected. Your music will be controlled via your music player with the volume being adjusted on the speaker's volume buttonsNote:-The handsfree function is not available in AUX line in mode.- Bluetooth Mode for music streamingPrior to using your Speaker under Bluetooth mode, you will need to pair it with a Bluetooth-enabled device, e.g. your mobile phone, music player or PC/laptop.After switching power on, the speaker will have emit a tone and the blue indicator light will flash consecutively which indicates the Bluetooth function is available.The pairing procedures are specific for different mobile phone models and brands. Please refer to your mobile phone's user manual for further information.The general pairing procedure is as follows:1. Make sure the mobile phone and the speaker are within Bluetooth range (i.e. not more than 10 meter apart).2. Activate your mobile phone's Bluetooth function and set your mobile phone to search for Bluetooth devices. After the search is completed, select the "SCABT" from the Bluetooth device list.3. You can now enjoy your music with the speaker by controlling the music via your music player and with the volume being adjusted on the speaker's volume buttons.Note:1. The Bluetooth speaker will only sync with one device at any time, the connection cannot be deleted when matching. It can only be deleted in disconnection mode.2. A Bluetooth connection list cannot have two devices with the same name. This will cause one of the two devices to fail to connect via Bluetooth.3. When playing music on some mobile phones, the music will be transmitted to the mobile phone's speaker instead of the portable speaker. You have to select "transmit the sound via Bluetooth" in the settings menu and then choose "SCABT" as speaker device. The music will be transmitted to the speaker. Please refer to your mobile phone's user manual for further information.4. Some smart phone's and music players do not have smooth cache, this will cause a slight "POP" tone when paused. This is a normal sound.5. If Bluetooth pairing fails, delete other Bluetooth devices in the connection list, restart speaker and try again.6. The disconnection of Bluetooth is not immediate and will take a few seconds delay to fully disconnect from the smart phone.-Making and Answering Phone CallsWith your phone and the speaker is synced via Bluetooth 1. To make a call, directly dial the number on your phone 2. To answer the phone call, short press the " II" button on the speaker. 3. Press the " II" button again to hang up the call4. The volume can be adjusted by pressing the volume button on the speaker. Note:1. The hands free function is only available in Bluetooth mode 2. The Bluetooth speaker features an anti-signal disruption design, but can still be interrupted by ahigh frequency device or electromagnetic fieldMaintenance and CareRead the following recommendations before using your speaker. By following these points you will be able to enjoy the product for many years. - Do not let small children play this product - Do not expose the speaker to liquid, moisture or humidity to avoid the product's internal circuit being affected. -Do not use abrasive cleaning solvents to clean the speaker. - Store the speaker out of direct sunlight and extreme temperatures (above 45°C/113°F or below -10°C/14°F), as this may shorten the battery life, affect the operation or degrade the performance of your speaker. - Do not dispose of the speaker in a fire as it might result in an explosion. - Do not expose the speaker to sharp objects as this will cause scratches and damage. - Do not drop the speaker. This may cause damage to the internal circuitry. - Do not attempt to disassemble the speaker. This may cause damage to the internal circuitry. - If the speaker is left for long period without use, charge once per month to avoid the overconsumption of the battery.