Setting up R for VS Code on Windows (2024)

Hello everyone, this is my first post on Medium. I’m not very familiar with this place to be honest but I wanted to share a guide on here for comprehensively setting up R on VS Code to help others.

You can ditch R Studio without losing out on much if you follow this guide completely. Enjoy all the benefits of using VS Code for R, including intellisense, copilot, version control, and more. Note that this guide is for Windows but you can easily follow it for Mac/Linux as well.

Here is a brief overview of the steps before we begin.

1. Have VS Code installed
2. Install R and language server
3. Install Python then Radian.
4. Install *Markdown All in One* and the *R* extension on VS code
5. Configure R.exe path, keyboard shortcuts, and .Rmd file identification for VS Code.

Figuring out the last step was very annoying but if you follow these notes you will not have to go through the same pain as I did.

Download R for windows from https://cran.r-project.org/bin/windows/base/ and note down where you install it. For me, I installed it in the default location: C:\Program Files\R\R-4.4.0. Note my version is 4.4.0, for you it might be newer.

You will need to add the bin folder of your R installation: path\to\R\R-4.4.0\bin to your system's PATH. If you don't know how to, read this.

Begin by pressing Windows start button and searching “edit the system environment variables”. Click the control panel option that shows up then do the following:

• A popup called System Properties should open. Go to the Advanced tab if you’re not already in it.
• Click Environment Variables.
• In System Variables click Path then the Edit… button.
• Click the New button then enter: path\to\R\R-4.4.0\bin then press enter.
• Click OK, OK, Apply, OK.
• Good job you’re done.

Check if R has been added to the system’s path by typing R --version in cmd outside of the R installation folder. If R is successfully installed and in your system's PATH, you should get a message showing the version of R you have.

At this point you can type R in a terminal to run R. Note that in PowerShell you will need to run type R.exe because R already stands for a different existing command.

In path\to\R\R-4.4.0\bin\x64, run Rgui.exe. Type the following in the R console:

install.packages("languageserversetup")

You may be prompted to select a CRAN mirror. Select 0-Cloud. Now type this in the R console:

languageserversetup::languageserver_install()

You will get a prompt saying “This will attempt to use source(https…)…” etc. Select yes. Another pop up will appear saying “Do you want to install from sources the package…”, doesn’t matter if you select yes or no.

Now lastly, type in the following into R console:

languageserversetup::languageserver_add_to_rprofile()
install.packages("rlang")
install.packages("jsonlite")

If you are asked to create a personal library, select yes.

You may or may not need to do this step depending on whether starting R is giving you any errors. In cmd, run R and see what happens. You will need to edit your .Rprofile you get any errors like the following:

Error: '\U' used without hex digits in character string (<input>:4:36)

This means the profile is using backslashes instead of forward slashes. You will need to locate where the .Rprofile file is stored and change the slashes. It is commonly in the C:Users\User\Documents directory, where C:Users\User is your user profile. To verify you user profile, in cmd you can type cd %USERPROFILE%.

If you cannot find a file called .Rprofile in Documents, launch Rgui.exe again, click File at the top right then Display file(s), it may be there.

If you still cannot find it, then do a full file search in file explorer, it should have been added somewhere in your computer after you ran languageserversetup::languageserver_add_to_rprofile() earlier.

Once you have found the .Rprofile file, change all the backslashes into forward slashes. For example, mine looks like this after I have fixed it:

# LanguageServer Setup Start (do not change this chunk)
# to remove this, run languageserversetup::remove_from_rprofile
if (requireNamespace('languageserversetup', quietly = TRUE)) {
 options(langserver_library = 'C:/Users/Admin/Documents/languageserver-library')
 languageserversetup::languageserver_startup()
 unloadNamespace('languageserversetup')
}
# LanguageServer Setup End

Now launch R and you should no longer get any errors.

You could skip this step but I highly recommend you install Radian to use as a shell for R instead of anything else. You will need Python installed. If you don’t have Python installed then look up a tutorial online. Ensure your installation of Python is added to the system’s PATH.

Once you have Python installed, open PowerShell or cmd as an administrator and run the following command:

pip3 install -U radian

Now you can run Radian,

radian

Note that Radian is useful for not only R, but also Python and Julia. You will set this to be the default terminal for R in VS Code later.

Before installing the two extensions you will need to get the path to your R executable. Open a terminal and run R, then type R.home(“bin”) like so:

> R.home("bin")
[1] "C:/PROGRA~1/R/R-44~1.0/bin/x64"

For me, R returns C:/PROGRA~1/R/R-44~1.0/bin/x64, which is the path to my R executable. Note this down.

Install the *R* and *Markdown All in One* VS Code extensions. Now go in the extension settings for the R extension and search Rpath: Windows. Set this to the R path you noted down.

At this point you’re all set to use VS Code for .r files. However, further configuration is needed for .Rmd files.

VS Code might have the file association for .Rmd files set to just plain markdown. If this is the case, you wont be get the benefit of R intellisense, nor will you be able to run code chunks in your .Rmd file.

Open settings.json from the command palette (CTRL + SHIFT + P) and ensure the following is present:

"files.associations": {
 "*.rmd": "rmarkdown"
},

Make sure that it’s rmarkdown, not just markdown.

Note that you can run lines of code in .R files by having your cursor on them and pressing CTRL + ENTER. This may not work if you try to run code inside code chunks in .Rmd files.

Open command palette and search Keyboard Shortcuts (JSON). Add the following code to the JSON file:

{
 "key": "ctrl+enter",
 "command": "r.runSelection",
 "when": "editorTextFocus && !editorReadonly && (editorLangId == 'r' || editorLangId == 'rmd' || editorLangId == 'rmarkdown')"
}

This adds R’s run selection command for .Rmd files. Be careful because this will run anything your cursor is on, including text outside of code chunks. I’m not sure if there’s a better way to do this. Definitely reach out to me if you know of one.

You may also add other shortcuts for .Rmd files for commands such as Run Current Chunk, Run Above Chunks, Run All Chunks, and so on. Add them with your desired key binds in the following format

{
 "key": "shortcut+here",
 "command": "r.command",
 "when": "editorTextFocus && !editorReadonly && (editorLangId == 'rmd' || editorLangId == 'r markdown)"
}

Here is a list of relevant commands to replace command with above.

• runAboveChunks
• runAllChunks
• runCurrentChunk

For example,

{
 "key": "ctrl+alt+p",
 "command": "r.runAboveChunks",
 "when": "editorTextFocus && !editorReadonly && (editorLangId == 'rmd' || editorLangId == 'r markdown)"
}

The last thing we want to do is set Radian to be the default terminal VS Code runs R on when we press CTRL + ENTER. Open the extension settings for the R extension and search Rterm: Windows. Set this value to path to your Radian executable.

To find where your Radian executable is just type where radian in any terminal and you should get the path.

Good job, you’re done. Enjoy coding R with all the benefits of Visual Studio Code. Feel free to give me any feedback for my R notes and/or installation guide.

You can contact me on LinkedIn for a quick reply. If you want to read some notes on using R for Data Analysis and ML checkout my GitHub repository.

Hope this helped you.